To operate this appliance safe , please be sure that it has been installed to a professional standard respecting
the installation instructions . Damages occur because of incorrect installation are not within the warranty.
While doing the installation , please wear protective gloves to prevent yourself from getting cut by sharp edges
Check the appliance if there is any damage before installation and do not connect the appliance if there is .
Before turning on the appliance , please clean up all the packaging materials and adhe-sive film from the
appliance.
The dimensions attached are in mm.
It is necessary to have the plug accessible or incorporate a switch in the fixed wiring, in order to disconnect the
appliance from the supply after installation when necessary.
Warning:The appliance must not be installed behind a decorative door in order to avoid overheating.
OPERATING THE APPLIANCE
IDENTIFYING THE APPLIANCE
Confirm the model number. You can distinguish model number by the control panel.
COMPONENT
1. Oven – Function
2. ON / OFF
3. Timer / Child-Proof Lock
4. End time
5. Quick preheat
6. Duration & Clock Setting
7. Temperature Setting
8. Lamp ON / OFF
9. Start / Pause
10. Adjust
12
34
Turn this knob to change heating mode.
Switch on and o oven.
Use timer function/use child-proof lock with 3s press
Set an end time to the cooking duration.
Use this to have a quick preheat.
Set a duration time then select function & set clock in standby mode.
Press to set temperature.
Switch on and o the lamp.
Start and pause the cooking process
Change the adjustment values shown in the display.
56
78
91
28
BUILD IN OVEN
THE072320MD
0