If you would like a manual, you can:
• download a free electronic version from the internet:
www.ab.com/micrologix or www.theautomationbookstore.com
• purchase a printed manual by:
– contacting your local distributor or Rockwell Automation representative
– visiting www.theautomationbookstore.com and placing your order
– calling 1.800.963.9548 (USA/Canada)
or 001.330.725.1574 (Outside USA/Canada)
Safety Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or
non-hazardous locations only.
Explosion Hazard
ATTENTION
!
Use only the following communication cables and replacement connectors in Class
I, Division 2 Hazardous Locations.
Communication Cables for Class I, Division 2 Hazardous Locations
1761-CBL-PM02 Series C
1761-CBL-HM02 Series C
1761-CBL-AM00 Series C
1761-CBL-AP00 Series C
2707-NC8 Series B
4 0 0 7 2 - 0 5 1 - 0 1 _ 1 7 6 1 - i n 0 0 2 b - m u - p . p d 5
Advanced Interface Converter (AIC+) and DeviceNet Interface (DNI)
• Substitution of components may impair suitability for Class I,
Division 2.
• Do not replace components or disconnect equipment unless
power has been switched off and the area is known to be
non-hazardous.
• Do not connect or disconnect connectors or operate switches
while circuit is live unless the area is known to be
non-hazardous.
• This product must be installed in an enclosure. All cables
connected to the product must remain in the enclosure or be
protected by conduit or other means.
• AIC+ must be operated from an external power source.
2707-NC9 Series B
2707-NC10 Series B
2707-NC11 Series B
1761-RPL-RT00 DeviceNet Connector
1746-RT30 AIC+ Connector
Publication 1761-IN002B-MU-P - July 2003
5
1 1 / 3 / 2 0 0 6
5
1 0 : 3 1 : 4 5
A M