Warranty; Technical Data - Kurtz Ersa EASY ARM 2 Manual De Instrucciones

Technical Data

1.2

Warranty

The filters represent wearing parts which are not subject to warranty. Material or manufac-
turing defects must be indicated and accompanied by the return of goods, giving notice of the
defect as well as producing the purchase receipt, which must be confirmed, before returning
the goods.
The warranty time complies with the specifications of the applicable General Conditions
of Sale, Delivery and Payment of Ersa GmbH. Ersa GmbH can only assume a warranty if the
device is returned in the original packaging.
Any inappropriate use and tampering with the device shall void the warranty and liability
claims of the buyer against the manufacturer.
2. Technical Data
EASY ARM 2
Dimensions (H x W x D)
Weight
Noise level
Volume flow rate per connection
Low pressure
Filter class:
Filtration efficiency (HEPA):
Pre-filter 1- 10 µm particles;
Combination filter < 1 µm particles
Combination filter area
Gas filter
Combination filter service life
Electrical data
Power consumption in standby
Fuse
Connections
Ersa EASY ARM 2
Use only for soldering fume. Not for strongly acidic soldering fume. Do not
absorb solvent vapours.
470 mm x 255 mm x 490 mm
15 kg
50 dB (A)
110 m³/h (free running/with a new filter)
1800 Pa
F7 pre-filter (fleece)/H13 combination filter
80 – 90 %;
99.95 %
2.2 m²
Activated carbon
1,500 h (in single-shift operation, hand soldering)
80 W, 100-240 V AC, 50/ 60 Hz
8 W
6.3 A
Interface to i-CON soldering stations, remote switch, or some Ersa
rework systems.
Note on the filtering action:
Optimum gas filtering requires the following parameters:
Temperature of the process air in the gas filter: < 38 °C
Relative humidity: < 60 % RH
Boiling point of the substance: > 0 °C
3BA00217 • 2019-03-12 • Rev. 3 21