For Your Safety
3.
For Your Safety
3.1
General Safety Notes
22
Imperatively read the operating instructions before using the device. It is rec-
ommended to keep the operating instructions close to the device to ensure
that they can be viewed immediately by the user if necessary.
The user has to immediately inform the supervisor or the manufacturer in
case of changes in the operating behaviour or to safety-related device parts.
The operator is responsible for properly using the product and training the
user. The generally applicable legal national safety and accident prevention
regulations as well as the supplementary user's guide of the machine owner
have to be observed. The manufacturer is not liable for any damage caused
by incorrect operation or failure to observe hazard warnings!
In any case, please refrain from any technical changes to the device; repairs
must only be performed by the manufacturer or an authorised repair service.
Only use original spare parts. Only use original accessories approved by the
manufacturer for this product.
Always supervise the use of the device!
Never open the device or its components unless specifically stated in these
instructions, otherwise you may risk personal injury or property damage.
Contact your supplier if necessary.
Always keep the ventilation openings of the device unobstructed in order to
avoid overheating. Make sure that the free circulation of air is not impaired
and that there is sufficient distance between the ventilation openings and
other objects. Keep the area around the device clean (especially free of dust
and lint) so that no dirt can be sucked by the device fans.
This tool can be used by children aged 8 and over, as well as by people
with reduced physical, sensory or mental capabilities or lack of experi-
ence and knowledge, when under supervision and instructed on the safe
use of the tool and if they understand all related risks.
Do not let children play with this tool. Cleaning or maintenance must not
be carried out by children without supervision.
3BA00217 • 2019-03-12 • Rev. 3
Ersa EASY ARM 2