Install The Wheels - Southland S-FTT-160-E Manual Del Operador

Assembly
(Continued)
• Save all instructions
B
Assembly Instructions
The tiller comes fully assembled except for a few parts. The following instructions will help you complete the tiller assembly.

INSTALL THE WHEELS

1. Slide the wheel hub onto the wheel axle.
2. Add the locking washer and pin to secure wheel.
Saddle Bolts
Handle Knobs
ATTACH UPPER HANDLE
1. Slide the upper handle down over the lower handle and
align the holes.
2. Insert the saddle bolts into the holes as shown and
securely with the handle knobs.
3. Tighten the handle knobs securely.
Questions? Call Toll Free at 1-800-737-2112
(See Figure 2)
Saddle Bolts
Handle Knobs
(See Figure 3)
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Figure 2
INSTALL THE DEPTH REGULATOR
1. Remove the bolt and knob from the depth regulator lever.
2. Insert the depth regulator into the bottom of the depth
regulator bracket.
3. Insert the detent pin thru the bracket and lever.
4. Insert the cotter key to secure the pin.
Figure 3
8
(See Figure 4a and 4b)
Copyright © 2009 MAT Engine Technologies, LLC
Figure 4a
Figure 4b