Auto Clean System - Black and Decker CM4100S Manual De Usuario

AUTO CLEAN
De-scaling With Auto Clean™
Over time, calcium deposits or "scale" may build up in your brewer. Scale is
non-toxic but if left unattended can hinder brewer performance. Regularly
de-scaling your brewer helps to maintain quality coffee as well as the
lifespan of the heating element, and other internal parts that come in
contact with water throughout the brew process.
To make the de-scaling process as effortless as possible, an Auto Clean™
system has been programmed into your coffeemaker.
When should I use Auto Clean™?
After every 60 brews, the word "CLEAN" will be displayed and blink. This
notifies you it is time to run the Auto Clean™ system. "CLEAN" will be
displayed until you run the Auto Clean™ system. If you would like to clean
your coffeemaker prior to 60 brew cycles, you may do so by following the
steps below.
How do I use Auto Clean™?
Follow the simple steps below. Your coffeemaker will take care of the rest.
1. Combine 6 cups of white vinegar and 4 cups of cold water in carafe.
2. Pour into water reservoir.
3. Place an 8 to 12 cup basket style paper filter in the removable filter
basket. Insert filter basket into filter basket holder and close cover.
4. Make sure the lid of the carafe is in place and place empty carafe on
the carafe plate.
5. Plug power cord into an outlet.
6. Press AUTO CLEAN to activate cleaning cycle; the word CLEAN is
displayed and the POWER ON light illuminates.
7. Part of the mixture will brew through. Remaining mixture will be held in
coffeemaker for 30 minutes before completing its brew through.
Note: The entire cleaning cycle will take 45–60 minutes to complete.
8. When the coffeemaker completes the AUTO CLEAN cycle, it shuts off
automatically.
9. Brew fresh water through appliance following instructions given in
GETTING STARTED before brewing coffee again.
SYSTEM
®
9