Corrective Maintenance - Industrial Air IAD Serie Manual De Mantenimiento Y Operacion

CORRECTIVE MAINTENANCE

Refer to the table below if your dryer malfunctions.
Problem
The device does not start after
pressing the Start button.
There are condensates in the dryer outlet but
the refrigerant pressure
normal pressure
There are condensates in the dryer outlet but
the refrigerant pressure gauge indicates high
pressure
No condensates in the outlet of the drain
solenoid valve
The outlet air temperature is similar or hotter
than the inlet air temperature
Dryer stopped
The high-pressure safety lamp is switched on
The overcurrent safety lamp is switched on
Solution
Cause
The power light
does not switch on.
The power light
switches on.
gauge indicates
⊙ ⊙ ⊙ ⊙
⊙ ⊙ ⊙ ⊙
⊙ ⊙ ⊙
⊙ ⊙
⊙ ⊙ ⊙
⊙
⊙
⊙
⊙ ⊙
⊙
⊙ ⊙
⊙ ⊙
⊙ ⊙ ⊙
⊙ ⊙
⊙ ⊙
19