Vibra-Call Function; Call Feature; Roger Beep (End Transmission Tone); Keypad Beep - Midland G9 Manual De Uso

4 6

Vibra-Call function

5 7
3
Midland G9 Plus is equipped with the "Vibra-Call" feature, which provi-
2
des a silent alert for incoming calls.
1
1. To activate this feature, press the MENU button until the display
shows
14
Use the ▲▼ buttons to disable or enable this feature (on: enables,
2.
oF:disables).
3. Push PTT [11] to confirm or wait for 5 seconds.
20

CALL feature

Midland G9 Plus can send 5 different CALL tones. To send this audio si-
gnal to other users, press the CALL/
To select the CALL tones:
1. Press MENU, until the display shows "CA" and the active tone code.
21
By pushing ▲▼ you will hear the 5 pre-set melodies.
2.
22
3. Confirm by pressing PTT or wait for 5 seconds.
23
24

ROGER BEEP (End transmission tone)

15
19
When the PTT button is released, the radio will beep to confirm to other
users that your transmission has finished.
In the Midland G9 Plus this function is factory disabled.
18
To activate it:
1. Press the MENU button until the display shows "rb of";
17
CALL
Using the scroll buttons ▲▼ select "on" and "rb on" will be displa-
2.
16 MENU
yed;
To confirm the roger beep activation, press PTT or wait for 5 secon-
3.
ds.

Keypad Beep

Everytime a button is pressed, you will hear a beep.
To disable the beeps, follow this procedure:
1. Press MENU, till the display shows "bP on".
Push ▲▼ till "bP of" is displayed.
2.
3. Confirm your selection by pushing PTT or wait for 5 seconds.
In this way, all beeps and tones are disabled.
To enable the keypad beep, repeat this procedure and select "bP on"
18 |
8
11
9
10
12
13
.
20
21
22
EMG
23
24
15
key.
Midland G9/G9E Plus instruction guide