Battery Removal - Silk’n Tightra Manual Del Usuario

12.2 Battery removal

At the product's end of life, you are required to remove the
battery before disposal. To do this, the device must be opened
EN
up. The device will no longer function after this procedure, nor
can it be repaired. Any warranty will be void when the device
casing is opened and the battery is removed. Home Skinovations
Ltd is not liable for any physical or material damages as a result of
performing this procedure.
Disconnect the device: Remove the device from the
1.
electricity supply, remove the USB cable (#9) and make
sure the battery is empty.
Open the casing: Use a small tool (e.g., screwdriver or
2.
utility knife), to open the device casing.
Remove the battery: Place the device on a sturdy table.
3.
Hold the printed circuit board (green) with one hand, and
remove the battery carefully with the other hand. Do not
damage the battery.
22