Grandstream HT814 Guia De Inicio Rapido página 4

OVERVIEW
The HT814 is a 4 port analog telephone adapter (ATA) that allows users to create a
high-quality and manageable IP telephony solution for residential and office environ-
ments. Its ultra-compact size, voice quality, advanced VoIP functionality, security pro-
tection and auto provisioning options enable users to take advantage of VoIP on ana-
log phones and enables service providers to offer high quality IP service. The HT814
is an ideal ATA for individual use and for large scale commercial IP voice deployments.
HT814 PORTS
Port Description
Power socket. Used to power HT814 (12V - 1A)
Network LAN port. Used to connect your HT814 to local
network when using as router.
Network WAN port. Used to connect HT814 to your router
or gateway using an Ethernet RJ45 cable.
FXS ports to connect analog phones / fax machines to
HT814 using RJ11 telephone cable.
Factory reset button. Press for 7 seconds to reset to factory
default settings.
CONNECTING THE HT814
The HT814 is designed for easy configuration and easy installation, to connect your
HT814, please follow the steps below:
1. Insert a standard RJ11 telephone cable into the phone port and connect the other end of
the telephone cable to a standard touch-tone analog telephone.
2. Insert the ethernet cable into the internet or LAN port of the HT814 and connect the
other end of the ethernet cable to an uplink port (a router or a modem, etc.)
3. Insert the power adapter into the HT814 and connect it to a wall outlet.
4. The Power, Ethernet, and Phone LEDs will be solidly lit when the Phone Adapter is
ready for use.
3
CONFIGURING THE HT814
The HT814 can be configured either using the embedded Web GUI using PC's web
browser or using the IVR voice prompt menu.
Obtaining the IP address
The HT814 is by default configured to obtain the IP address from DHCP server where the
unit is located. In order to know which IP address is assigned to your HT814, you should
access to the "Interactive Voice Response Menu" of your adapter via the connected phone
and check its IP address mode.
Please refer to the steps below to access the interactive voice response menu:
1. Use a telephone connected to phone 1,2,3 or phone 4 ports of your HT814.
2. Press *** (press the star key three times) to access the IVR menu and wait until you
hear "Enter the menu option ".
3. Press 02 and the current IP address will be announced.
Configure using Web UI
1. Connect the computer to the same network as your HT814 and make sure the HT814 is
booted up.
2. You may check your HT814 IP address using the IVR on the connected phone.
3. Open the Web browser on your computer.
4. Enter the HT814's IP address in the address bar of the browser.
5. Enter the administrator's password to access the Web Configuration Menu. (By default
the admin password is admin)
Note:
The computer must be connected to the same sub-network as the HT814. This can be
easily done by connecting the computer to the same hub or switch as the HT814.
Please download the user manual and FAQ for more
detailed configuration instructions:
http://www.grandstream.com/our-products
4