Press the button of each detec-
tor to associate.
9.2 Association test
9.3 Close up the transmitter
1
2
Refit the upper cover
and clip it onto the unit.
Lock the unit.
The green repeater LED will
come on briefly.
Press the button of the detector to test.
The transmitter vocally indicates the detector type associated and its status.
Example: "Smoke detector, nothing to report"
2
1
Close up the repeater and lock
the unit.
To exit the association mode
press the T2 button of the trans-
mitter (the exit is automatic after
5 minutes).
Refit the bottom cover.
67
EN