Setting The Time - Patek Philippe CH 28-520 C/522 Manual De Instrucciones

INSTRUCTIONS
WINDING CROWN
The winding crown is used to manually wind the
watch (position 1) and to set the time (position 2).
Your watch is equipped with a screw-down crown
that must be completely unscrewed before you can
perform any adjustments.
WINDING
Your watch incorporates a self-winding movement.
The movements of your wrist set a centrifugal mass
in motion; this tensions the mainspring, which stores
the energy. When you take off your fully wound
watch, it will continue to run for at least 45 hours.
When it has stopped after depleting the power
reserve, it can be rewound by hand (about 10 clock-
wise turns of the crown).
8

SETTING THE TIME

To set the time, unscrew the crown completely, pull
it gently all the way out, and move the hands in
either direction. Once you have set the correct time,
push the crown home again and screw it down. We
advise against turning the hands counterclockwise
across midnight because this would require a cor-
rection of the date; however, it would not damage
the calendar mechanism.
Note: If your watch has stopped running, first move the
hands clockwise until they pass 12 o'clock and the date
advances by one day (at midnight). Then set the correct
time. If it is past noon, move the hands forward beyond
12 o'clock again.
9