Rosenbauer HEROS Información Para El Usuario página 22

engl. 8.4.04_NEU 31.10.2007
Move the fastenings down to reduce the
space between nose and visor
Eye height roughly in the middle of the visor
– correct position
4.1.3 Adjusting the chin strap
There is a plastic catch for fastening and
undoing the chin strap. Pull the strap to
tighten the fit and slacken it by pressing the
catch. Attach the free end to the Velcro strip.
Tighten the chin strap by pulling the free end
9:11 Uhr Seite 21
Undo the chin strap by pressing the
catch and pulling the strap down.
4.1.4 Visor
Once you have fitted the helmet properly,
pull the visor down as far as it goes. You
do not need to remove glasses. When
you push it back up, make sure that it
clicks into place.
4.1.5 Using the HEROS with a
breathing mask (five-point
adjustment)
Turn the knob to maximum
21 No. 04/00, Edition 05/2003