Product Features; Noise/Vibration Information; Technical Data - Bosch AdvancedMulti 18 Manual Original

18 | English
able for working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working close to edges
and flush with surfaces.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) AutoClic lever for unlocking the application tool/
accessory
(2) On/off switch
(3) Battery charge indicator
A)
(4) Battery
(5) Battery release button
(6) Orbital stroke rate preselection thumbwheel
(7) Ventilation slots
(8) Auxiliary handle (insulated gripping surface)
(9) Thread for auxiliary handle
(10) Tool holder
(11) 180° light band
(12) Plunge cut saw blade
A)
(13) Sanding plate
A)
(14) Sanding sheet
A)
(15) Depth stop
(16) Segment saw blade
(17) Handle (insulated gripping surface)
A)
(18) Extraction hose
A)
(19) Extraction outlet
(20) Dust extraction system
(21) Clamping lever for dust extraction system
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless multifunction tool
Article number
Orbital stroke rate
preselection
Constant electronic control
Soft start
AutoClic tool holder
Rated voltage
No-load speed n
0
Oscillation angle on left/
right
Weight according to EPTA-Procedure 01:2014
– without auxiliary handle
– with auxiliary handle
1 609 92A 4N1 | (12.10.2018)
A)
A)
A)
A)
A)
AdvancedMulti 18
3 603 A04 0..
V=
−1
min 10000−20000
°
kg
kg
Cordless multifunction tool
Permitted ambient temperature
– during charging
– during operation
during storage
Recommended batteries
Recommended chargers
A) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.

Noise/Vibration Information

Noise emission values determined according to
EN 62841‑2‑4.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Working without the Auxiliary Handle
Vibration total values a
determined according to EN 62841‑2‑4 (sanding),
EN 62841‑2‑11 (cutting):
Sanding: a =6 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
Working with the auxiliary handle
Vibration total value a
determined according to EN 62841‑2‑4 (sanding),
EN 62841‑2‑11 (cutting):
Sanding: a =6 m/s
h
Cutting with plunge cut saw blade: a
Cutting with segmential saw blade: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
●
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
●
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
●
increase the vibration and noise emissions over the total
●
working period.
18
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
1.4
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
1.5
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
1.6
and organising workflows correctly.
AdvancedMulti 18
°C
A)
and °C
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=16 m/s
h
=14 m/s
h
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2
=20 m/s
h
=16 m/s
h
Bosch Power Tools
0 to +45
−20 to +50
PBA 18V...V-.
PBA 18V...W-.
AL 22.. CV
AL 18.. CV
2
, K=1.5 m/s ,
2 2
, K=1.5 m/s .
2
, K=2.5 m/s ,
2 2
, K=1.5 m/s .