Maintenance; Overview; 6.2 Preventive Maintenance; 6.3 Corrective Maintenance - ESAB LHI 825 Manual Del Usuario Y Repuestos

6

MAINTENANCE

6.1

Overview

Periodic maintenance is important for the safe and reliable operation.
Only people with appropriate electrical skills (team authorized) may remove the security plates.
ATTENTION!
All of the terms of appointment of the supplier's warranty will be applied if the client
tries to some work of rectification of any flaw in the product during the warranty
period.

6.2 Preventive maintenance

The LHI Rectifier requires little maintenance in normal environment and opperation conditions.
It is sufficient to blow it dry clean using dry compressed air free from oil once a month.
After cleaning the equipment with blow dry air, check that the electric connections and
components are properly fixed.
Check for possible faults in the wire isolations or electric cables, including the welding cable and
any others and if any of them is faulty substitute it.

6.3 Corrective maintenance

In order to ensure the perfect functioning and performance of a ESAB equipment, use only
original parts supplied by ESAB PLC or approved by them.
All guarantee undertakings from the supplier cease to apply if the customer uses non-original or
non -approved parts when replacing any of them.
Spare parts can be obtained from the ESAB Authorized Services or from its Sales Distributors
listed on the last page of this Manual. Always inform the Equipment Model and Serial Number.
7

DEFECT DETECTION

Do these checks and inspections recommended before you call an authorized service
technician.
TABLE 7.1
Type of defect
Unable to open the electric arc
Poor results of welding
Make sure the switch on/off switch is in "on" and if the
fuse or the circuit breaker are in good condition.
Check if the current set is according to the electrode
- 31 -
Action
used