Emerson VOLTA CF590BQ00 Manual Del Usuario página 25

13. Light Kit LED Driver Replacement
13.6
Slide the ceiling cover and the coupler cover up and off
the downrod to access the top of the motor housing
(Figure 44).
13.7
Remove the hairpin clip from the clevis pin.
Remove the clevis pin from the motor coupling to release the
downrod from the motor coupling (Figure 45).
Retain both the clevis pin and the hairpin clip for future
reinstallation.
13.8
Remove the two setscrews, using a Phillips head
screwdriver, from the motor coupling (Figure 45).
Retain both setscrews for future reinstallation.
Remove the downrod from the motor coupling and retain
for future reinstallation.
13.9
Remove the six upper motor cover screws, using a Phillips
head screwdriver (Figure 46).
Slide the upper motor cover up and off the downrod to
expose access to the light kit driver.
Retain the six screws and motor cover for future
reinstallation.
Figure 44
CLEVIS
PIN
REMOVE
PHILLIPS HEAD
SETSCREWS (2)
Figure 45
REMOVE UPPER
MOTOR COVER
SCREWS (6)
UPPER
MOTOR COVER
Figure 46
25
(Continued)
CEILING
COVER
DOWNROD
COUPLING
COVER
FAN MOTOR
HOUSING
MOTOR
COUPLING
HAIRPIN
CLIP
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF590