Festo MTR-DCI Manual De Instrucciones página 17

1 User
The MTR-DCI motor unit is an intelligent servo motor con-
sisting of DC motor, planetary gear, encoder and
integrated control electronics.
The higher-order PLC/IPC is connected via the controller
interface:
– MTR-DCI-...-IO digital inputs/outputs
– MTR-DCI-...-PB: PROFIBUS-DP
– MTR-DCI-...-CO: CANopen
– MTR-DCI-...-DN: DeviceNet
Commissioning and parameterization are carried out:
– with the FCT software package and the MTR-DCI plugin
via the RS232 interface
– or for MTR-DCI-...H2 optionally with the control panel
(display and four operating buttons).
Note
This brief overview is a part of the operating package
P.BP-MTR-DCI. It serves only as initial information and
does not replace the complete documentation, which is
contained as a PDF file on the CD ROM supplied.
S It is essential that you observe the information and
the safety instructions in the complete manual for the
motor unit.
S Please consult your local Festo Service or write to the
following e-mail address if you have any technical
problems: service_international@festo.com
Festo P.BE-K-MTR-DCI
instructionsEnglish
English
1201c
17