Dometic FreshLight Instrucciones De Montaje página 35

Dometic FreshLight
12 Vg cable
You can connect the lighting to the battery. This enables you to switch on the
lighting even if the 230 Vw voltage supply is not connected.
To do this, proceed as follows:
➤ Disconnect the 2-pin plug (4) from the socket on the main board.
➤ Connect the positive cable (5) with the plug.
➤ Connect the negative cable (6) with the plug.
Connecting the air outlet unit with the roof air conditioner
See fig. d
➤ Remove the premounted filter covers (1).
➤ Remove the premounted air filter (2).
Fitting the seals
See fig. e
➤ Fit the seals (1).
Determine the thickness by referring to the following table:
Ceiling thickness
25 mm
25–30 mm:
30–35 mm:
35–40 mm:
40–45 mm:
45–50 mm:
50–55 mm:
55–60 mm:
EN
Seal thickness
20 mm
25 mm
30 mm
35 mm
40 mm
45 mm
50 mm
55 mm
Installation
33