Singer 288 Manual De Uso página 27

Threadlng Ih. Bobbln
c.••
1. Hold bobbin to that thread unwinds in
direetion shown, and insert bobbin in
bobbin case.
2. Pull thread into notch A in bobbin case,
draw it toward left and into slot B.
3. Draw approximately 10 cm (4 inches) of
thread diagonally across the bobbin.
4. Close slide plste, allowing thread to extend
through the slot between the slide plete and
the needle plste.
' - - - - - - - - - - - - 26