Work Pro WNC 1 Guía Rápida página 6

EN
WNC 1 (Interface)
By default, WNC 1 is configured with its 8 STATEs that allow to select one different input and applied to
Output 1.
WNC 1 versatility is showed with the number of different configurations that can be made of easily and quickly.
Below are several examples.
Quick Guide
Outputs column allows to
select the output or outputs to
configure.
Configuration column shows
the STATEs, which can be
enabled at will.
Clicking on the triangle next to
the STATE, deploys the
configuration matrix.
Each line corresponds to an
output (in this case output 1
and marked as 1).
Each box corresponds to an
input (from 1 to 8 ordered from
left to right).
Thus, as shown the image in
theright, the STATE 1 enables
input 1, the STATE 2 input 2
and so on, all on output 1.
4 STEREO SOURCES
In this case 4 stereo devices are applied
to Digiline and each press allows to
select one of them.
2 ZONES
This example will control 2 zones
(Output 1 and 2), and 3 inputs
Each press will select one of these 3
inputs and it will apply to both outputs
- 5 -
WNC 1
www.work.es