Safety Symbols - Westinghouse 20V+ PSA20 Manual Del Usario

SAFETY SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
Symbols Name
V Volts
A Amperes
Hz Hertz
W Watts
hrs Hours
No Load Speed
n
o
Alternating Current
Direct Current
/min Per Minute
Wet Conditions Alert
Read the Operator's
Manual
Eye Protection
Safety Alert
Safety Footwear
Keep Bystanders
Away
Kickback
Lithium-Ion Battery
Recycling
Ear Protection
Gloves
Risk of Electrocution
Electric Shock
Designation/Explanation
Voltage
Current
Frequency (cycles per second)
Power
Time
Rational speed, at no load
Type of current
Type or a characteristic of current
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations
To reduce the risk of injury user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1 when operating this equipment.
Precautions that involve your safety.
Wear non-slip safety footwear when using this equipment.
Keep all bystanders at least 50 ft. away.
DANGER! Beware of kickback.
Designates that this tool is in compliance with Lithium-Ion battery
recycling program requirements.
Wear ear protection when operating this equipment.
Wear non-slip, heavy-duty protective gloves when handling the pole
saw and the blade.
DANGER! Risk of electrocution!
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
3