Publicidad
PROJECT 613 • PROJECT 614
Discovery Mountain
Discovery Mountain
SIDE MOUNTING OPTION 1
IF YOU PLAN TO ADD A DISCOVERY MOUNTAIN TO YOUR EXISTING ALPINE KIT, THE UNIT
MUST BE MODIFIED.
THIS MODIFICATION WILL REQUIRE ADDITIONAL LUMBER TO COMPLETE.
LUMBER REQUIREMENTS ARE: ONE 2'' X 4'' X 8' AND ONE 5/4'' X 6'' X 10'
CUTTING GUIDE - Cut lumber as indicated
55''
(1)- 2'' x 4'' x 96''
55-1/2''
1 -
2"X4"X96"
55''
(1)- 5/4'' x 6'' x 120''
55-1/2''
1 -
5/4"X6"X120"
INSTRUCTIONS:
1. Attach two 5/4'' x 6'' x 55'' as shown. Where Wrap Loc Bracket interferes with path of
screws, install screws through board to pass below bracket.
2. Attach one 2'' x 4'' x 55'' board flush with bottom of lower 5/4'' x 6'' board.
3. Mount the Discovery Mountain to the 2'' x 4'' x 55'' per Discovery Mountain instructions.
55''
55-1/2''
(3)
2-1/2'' Screws/nails
(Per Joint)
59
614
614
613
613
Publicidad
