Matters Needing Attention; Fault Analysis And Handling - SPORTSTECH F75 Manual De Instrucciones

i
This product is not available for download and installation function other than the au-
tomatic update of resources provided by our company , Due to the need for product
improvement, product design may be carried out without prior notice.

14. MATTERS NEEDING ATTENTION

1. Power socket with ground line must be used for your safety when you use the treadmill.
2. Before exercise, please check whether the power supply load, and check the safety lock is valid.
3. if an abnormal situation happen during the running process, pull off safety clip. If non professional
people, do not attempt to remove or repair the safety lock, it will be quickly slow down to stop running
to avoid damage the equipment.
4. If you have any questions regarding this products, please contact the dealer.

15. FAULT ANALYSIS AND HANDLING

Fault code
E01 Poor communication between electronic meter and
E02
E04
E05
E06 Error in power-on selftest of controller
E07
Cause
controller
Protection against blast shock
Failure of ascension
Overcurrent protection
Loss of parameter
77
Solution
1. Inscpect whether connecting line
between electronic meter and controller
suffers from poor contact.
2. Poor contact of main IC of controller.
Reinsert it..
3. Power of controller os abnormal.
Replace controller.
1. Open circuit or poor contact of motor.
Replace motor or check connector.
2. Breakdown of power tube. Replace
power tube or controller.
Replace ascension motor.
1. Overload.
2. Resistance of running platform is too
high and it shall be oiled.
3. Motor is damaged. Replace it.
Replace controller.
Replace controller or input parameter
again.