Rear Face Of The Transmitter; Interior Of The Transmitter - Multiplex ROYALpro 7 Manual De Instrucciones

pro
ROYAL
9.2.

Rear face of the transmitter

Fig. 9.2.1.: Rear face of the transmitter
Two sliding latches (marked "OPEN") provide a
fast, easy method of opening and closing the transmit-
ter, e.g. for changing the RF module (
The robust carry handle provides a safe method
of carrying the transmitter, and also protects the rear
face when you set the transmitter down.
As is usual with MULTIPLEX, the ROYAL
also fitted with a MULTIPLEX multi-function socket
installed as standard (marked "CHARGE"). It is used
as:
charge socket for the transmitter (
socket for Trainer operations
( 14.4.1. and 14.4.2.)
PC interface for backing-up model data
( 20.3.)
PC interface for updating the transmitter
( 20.3.)
PC interface for flight simulators
( 20.4.)
interface for a 'closed-loop' receiver connection
(without RF transmission) for programming and ad-
justment work using a Diagnosis lead (
The TORX screwdriver (size T6), which resides
in clips in the transmitter's back panel, is used for
various tasks such as adjusting the stick ratchet, fric-
tion and centring spring force, swivelling the stick
units, and for installing supplementary switches in the
installation wells "K" and "P".
4
Fig. 9.2.2.: TORX screwdriver in the transmitter back panel
16
9.3.
3 1
2
3
Fig. 9.3.1.: The interior of the transmitter
sists of six environmentally friendly, high-capacity AA-
9.4.3). size NiMH (Nickel-Metal-Hydride) cells. For safety
reasons the individual cells are permanently inter-
connected and protected by a heat-shrink sleeve.
!
pro
is
8.2.)
module is simply plugged into the main circuit board,
and can easily be changed if you wish, for example, to
switch to a different frequency band (
ROYAL
module:
HFM-S M-PCM/PPM, 35 MHz A- and B-band
20.2.).
HFM-S M-PCM/PPM, 40 / 41 MHz
selected channel / transmitter frequency.
!
!

Interior of the transmitter

The transmitter battery fitted as standard con-
Use genuine replacement batteries only!
Always heed the charging instructions!
( 8.2. and 8.3.)
The transmitter battery is fitted with a thermal fuse
which protects the battery - and above all the trans-
mitter - from short-circuit, reversed polarity and ex-
cessive currents. The transmitter does not feature
a separate fuse. For this reason it is essential to
use genuine MULTIPLEX transmitter batteries de-
signed for this transmitter.
RF module (Radio Frequency module). The RF
pro
is fitted with the HFM-S M-PCM/PPM RF
Modern Synthesizer RF module with software-
Only RF modules of this type may be fitted to
pro
the ROYAL !
Scanner with power-on guard can be fitted
( 20.6.2.).
2
1
9.4.3.). The
# 4 5600
# 4 5601