Risk Of Bursting; Risk From Moving Parts - Mi-T-M Corporation 37-1438 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

READ ALL SAFETY WARNINGS BEFORE USING PRESSURE WASHER
HAZARD
RISK OF BURNS

RISK OF BURSTING

RISK FROM MOVING PARTS

Operator's Manual
IMPORTANT SAFETY INSTRUCTIONS
POTENTIAL CONSEQUENCE
Serious injury may occur from
touching the engine, muffler or
heat exchanger. These areas can
remain hot for some time after the
pressure washer is shutdown.
Serious injury may occur from a
pressure washer malfunction or
exploding accessories if incorrect
system components, attachments
or accessories are used.
Serious injury or death may occur
if attempting to start the pressure
washer when the pump is frozen.
Serious injury may occur to the
operator from moving parts on the
pressure washer.
PREVENTION
Never allow any part of your body to contact
the engine, muffler or heat exchanger.
Never make adjustments to the factory set
pressures.
Never exceed manufacturers maximum al-
lowable pressure rating of attachments.
Do not allow any hoses to make contact
with the engine, muffler, or heat exchanger
to prevent the possibility of bursting. Avoid
dragging the hoses over abrasive surfaces
such as cement.
Use only manufacturer recommended repair
parts for your pressure washer.
In freezing temperatures, the unit must al-
ways be warm enough to ensure there is no
ice formation in the pump. Do not start the
pressure washer if it has been transported in
an open or non heated vehicle without first
allowing the entire unit to thaw.
Before making any adjustments, be cer-
tain the engine is turned off. Be certain
to disconnect the battery ground terminal
before servicing and the ignition cable(s)
is removed from the spark plug(s). Turning
the machinery over by hand during adjust-
ment or cleaning might start the engine and
machinery with it.
Do not operate the unit without all protective
covers in place.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido