Diagnostics; Led Status Displays - Lenze E94AYCDN Instrucciones Para El Montaje

8

Diagnostics

LED status displays

8 Diagnostics
LED status displays
Pos. Colour / status
ST
green is on
green is blinking
ER red is on
MS
green
off
off
off
on
blinking
blinking
NS
green
off
off
off
on
blinking
blinking
DE red is on
42
Description
The communication module is supplied with voltage and has a
connection to the standard device.
The communication module is supplied with voltage but is not
connected to the standard device (standard device is switched off,
being initialised, or not available).
An error has occurred on the communication module.
red
off The communication module is not supplied with voltage.
on The communication module is defective and must be replaced.
blinking The error in the communication module can be removed.
off The communication module works properly.
off The communication module has not been completely configured yet
or configuration is faulty.
blinking The communication module is in self−test mode.
red
off The communication module is not supplied with voltage via
DeviceNet or the "Duplicate MAC ID" test has not been completed
yet.
on The communication module cannot access the bus ( e.g. "Duplicate
MAC ID", bus off, invalid baud rate etc.).
blinking The error in the communication module can be removed.
off The communication module works properly and has established a
connection to the scanner.
off The communication module ...
l
works properly;
l
has completed the "Duplicate MAC ID" test;
l
has not yet been integrated by the scanner.
blinking The communication module ...
l
is in error status;
l
has received and accepted a telegram for identifying the faulty
devices ("Identify Communication Faulted Request").
The communication module is not accepted by the standard device
(see notes given in the documentation of the standard device).
l
EDK94AYCDN DE/EN/FR/ES/IT 4.0