User Guide - Bahco IZO-D Guia Del Usuario

BAHCO IZO TORQUE WRENCH USER GUIDE
14
1 Battery
Indicator
2 Tolerance
setup flag
3 Torque
reading
4 Units of
measure
The BAHCO IZO torque wrench is a robust replacement for the traditional
"click" wrench, providing better accuracy, easy preset adjustments, tolerance
adjustments and improved user friendly design.
Power On
Push "ON/ZERO" key – the torque wrench will
self-test, show the torque preset value for two seconds
and then show "0.0".
Units Select
Push "UNITS" key – to select "Nm", "ft lb" or "in lb".
Preset Adjust
While holding down the
until display flashes preset value.
Use (UP) or
(Display will roll-over at each end). Torque preset is adjustable between
10 % and 100 % of torque wrench full-scale.
Push ON/ZERO key to enter new preset value and you will
automatically return to measurement mode.
Tolerance Adjust
While holding down the
key until display flashes tolerance percent.
Use (UP) or
and 16 %. Push
automatically return to measurement mode.
6
1 2
5 6
5 CCW
indicator
6 Data in
memory
7 RS232 serial
output jack
(UP) key momentarily push
(DOWN) keys to change the preset value.
(DOWN) key momentarily push
(DOWN) keys to change the tolerance value between 1 %
ON/ZERO key to enter new tolerance value and you will
3 4 7
8 ON/ZERO
enter key
9 Units select
key
10 Increment
scroll key
11 Decrement
scroll key
8 10 12
9 11 13
12 Memory store
recall/clear key
13 Print RS232
setup key
14 Audible Alert
(6, 7, 12, 13 optional)
Nm
ON/ZERO key
ON/ZERO