Setting the PC
➢
Preset to the PC mode by pressing the SOURCE button.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Picture, then press the
ENTER button.
Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4
When you are satisfied with your setting, press the ENTER
button.
5
Press the EXIT button to exit.
Auto Adjustment :
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal.
The values of fine, coarse and position are adjusted
automatically.
Easy Setting
1 Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select Auto Adjustment, then
press the ENTER button.
Screen Adjustment: Coarse/Fine/Position/Image Reset
Coarse/Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
1 Press the ▲ or ▼ button to select Coarse or Fine, then
press the ENTER button.
Press the ◄ or ► button to adjust the screen quality, vertical
stripes may appear or the picture may be blurry. Press the
ENTER button.
Position
Adjust the PC's screen positioning if it does not fit the TV
screen.
1 Adjust the position by pressing the ▲/▼/◄/► button.
Press the ENTER button.
Image Reset
You can replace all image settings with the factory default
values.
English -
T V
Picture
Mode
: Standard
Cell Light
Contrast
Brightness
Sharpness
Auto Adjustment
Screen Adjustment
Detailed Settings
Picture Options
Reset
: OK
Move
Enter
Auto Adjustment in Progress
Please wait.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
: Standard
Sound Mode
: Custom
Sleep Timer
: Off
SRS TS XT
: Off
Energy Saving
: Off
Auto Adjustment
Move
Adjust
T V
Screen Adjustment
Coarse
Fine
Position
Image Reset
Move
Enter
T V
Position
Move
Enter
Image Reset is completed.
5
45
50
Return
Exit
50
11
Return
Return