Installing Batteries In The Remote Control; Switching Your Television On And Off; Viewing The Menus - Samsung 4 Serie Manual Del Usaurio

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as
shown in the figure.
 Install two AAA size batteries.
➢
 Make sure to match the "+" and "–" ends of the
batteries with the diagram inside the compartment.
 Do not mix battery types, i.e. alkaline and
manganese.
 Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool and dry
place if you won't be using the remote control for a long time. The remote control can be used up
to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢
If the remote control doesn't work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The main lead is attached to the rear of the television.
1 Plug the main lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
 Press the (Power) button (On/Off) on the front of the television or press the POWER button on the
remote control to switch the television on. The programme that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to "Storing
Channels Automatically" on page 13 or "Storing Channels Manually" on page 14.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to "Plug & Play Feature" on page 10.
 To switch the television off, press the
the POWER button on the remote control.
4 To switch the TV on, press the
button or number buttons on the remote control.

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel, Setup,
Input, and Digital Menu.
 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
(Power) button (On/Off) on the front of the television or press
(Power) button (On/Off) on the front of the TV or press the POWER
English - 
T V
Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G50
Detailed Settings
Picture Options
Reset : OK
Move Enter
►

5
45
50
50
R50
►
►
►
Exit