Hardware Overview; Hardware Installation - Intellinet 561082 Manual De Instrucciones

Hardware Overview

LEDs
The Intellinet PoE-Powered 5-Port Gigabit Switch
with PoE Passthrough is equipped with 11 LEDs that
provide information about the operational status.
Here's what they do:
LED Status
PWR On
Off
Link/Act On
Blinking
Off
PSE On
Off
Blinking
MAX On
Off
Blinking
Ports
This switch is equipped with five
Gigabit ports, a power connector and
an on/off switch.
Port Beschreibung
1 PD (powered device) port. When connected to a PoE injector, midspan or PoE switch that
is IEEE 802.3af/at compliant, this switch will draw power from the PoE injector or PoE
switch, and the included power adapter does not need to be used. Of course, this port can
also be connected to any standard Ethernet port, whether that port is PoE or not.
2-5 These are PSE (power sourcing equipment) ports — compliant with IEEE 802.3af/at— that
you can connect to PoE devices such as VoIP phones and network cameras. Of course, any
non-PoE device that is Ethernet compatible can be connected to these 4 ports.
DC The included power adapter can be connected here. See the next page for details.
/ O
| |
Press to turn the switch on; press

Hardware Installation

Refer to the diagram on Page 3.
Connect Port 1 to a PoE injector or switch to power as many as four PoE devices. You can use
the external power adapter if you do not have a PoE injector or switch, or if you require the
additional power budget the external power adapter provides.
Beschreibung
Power is supplied via the AC adapter.
No power is supplied via the AC adapter.
A network link has been established.
A network link has been established and data packets are being sent and
received.
No network link is established.
Port 1 (PD) is connected to a PSE port; for example, a PoE injector or PoE switch.
Port 1 (PD) is not connected to a PSE port.
There is insufficient power for the connected PoE device.
The system has reached a total power output of 55 W. The PoE total is nearing
its maximum level.
The system is using less than 55 W.
The power is not enough to supply PoE devices.
O
to turn it off.
5
ENGLISH