Echo Function; All Mode Talkback; Warranty Information; Disposal And Recycling - Albrecht AE7500 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Transmission Time Limiter
The maximum permitted uninterrupted transmission time can be limited. After the
selected time is expired the transmitter turns off. The PTT button must then be
released to reset the time-out timer and the radio is able to transmit again.
Press the SCAN/MENU key for more than 3 seconds and again three times
briefly. The LCD will show "tot" followed by the time in minutes, or "of"
representing timer off.
Rotate the CHAN control to select the tot time in steps of 5 or off.
An inactivity of more than 3 seconds exits all menu settings.
8.9

Echo Function

The Echo Function of the AE7500 comprises of four controls.
It is enabled or disabled by successively pressing the FUNC and the NB key. If
enabled, the 'Echo' icon is shown on the LCD. The intensity of the echo is controlled
by the E-VOL Control. With the E- DEL Control the time between the echo
repetitions is adjusted.
To achieve an echo effect, the echo delay should be longer and the echo volume
less then maximum. To get a reverb effect, the delay time must be low to get a high
density of repetitions and the echo volume must be set near to the maximum.
Avoid to adjust the echo volume to high, because this could lead to an unreadable
signal. The sound of your transmission can be monitored with the AMT function,
which is described next.

8.10 All Mode Talkback

The ATM function allows the operator to monitor the transmitted audio of the AE7500
in all modes. Turn this ATM control to adjust its volume to your convenience. In case
of audio feedback, the ATM volume or the microphone gain must be reduced. To
disable the talk back, turn this control full counter clockwise.
9

Warranty Information

The manufacturer/retailer guarantees this product for two years from date of
purchase. This warranty includes all malfunctions caused by defective components or
incorrect functions within the warranty period excluding wear and tear, such as
exhausted batteries, scratches on the display, defective casing, broken antenna and
defects due to external effects such as corrosion, over voltage through improper
external power supply or the use of unsuitable accessories. Defects due to
unintended use are also excluded from the warranty.
Please contact your local dealer for warranty claims. The dealer will repair or
exchange the product or forward it to an authorized service center.
You can also contact our service partner directly. Please include your proof of
purchase with the product and describe the malfunction as clearly as possible.
10

Disposal and Recycling

This radio was manufactured low-emission according to the European
WEEE directive. Please note that electronic and electric devices are not to
be disposed of with the household waste; return these devices to collection
points. Returning devices is free of charge for end users, since the industry
is covering the disposal costs. By returning the device to a collection point
you contribute to the recycling of valuable raw materials.
The crossed-trash bin symbol on the type label is intended as a reminder!
English
31

Publicidad

Tabla de contenido
loading

Tabla de contenido