Reset - hager TX460 Instrucciones De Uso

Modes available
This menu allows defining the use of Thermostat and PB Control
modes and select the preferred mode.
• Select the desired operation using
button
Only thermostat
only the Thermostat mode will be displayed. The user will have
no access to the PB Control mode button.
Only push-button
only the PB Control mode will be displayed. The user will have
no access to the Thermostat mode button.
Therm. + Push-butt
the user will have access to both operation modes. Switching
modes is only possible in manual operation by a pressing on
both buttons simultaneously.
Thermost. prefer.
the user will have access to both operation modes. The
Thermostat mode will be the preferred one, meaning that the
display will switch automatically to the Thermostat mode after
1 minute.
PB mode prefer.
the user has access to both operation modes. The preferred
mode is PB Control Mode, meaning that the display will switch
automatically into PB Control Mode after 1 minute.
• Press button to confirm.
When all Installation parameters are set, press button
return to the Installation screen.
106
and :
◀
C to
9.5 Language
• Select the language desired using
button
• Press button
to the screen Configuration.
The desired language must be selected on first startup.

9.6 Reset

This menu allows restoring the environment control and
regulation default values.
A message warns that reset will be
effective after confirmation.
• Press button
to screen Configuration.
107
and .
to confirm and return
to confirm and return