Hands-Free Phone Control; About The Hands-Free Phone; Answering A Call; Hanging Up The Telephone - Alpine KCE-350BT Manual De Operación

Hands-Free Phone
Control

About the Hands-Free Phone

Hands-free calls are possible when using a HSP (Head Set
Profile) and HFP (Hands-Free Profile) compatible mobile
phone with a ALPINE Bluetooth compatible CD head unit,
AV head unit, or Digital Media receiver.
• Avoid performing a hands-free call in a city where traffic is
congested, or in the narrow street.
• Shut the windows while calling.
• If both persons use a hands-free call to each other, or you
make a call in a noisy location, you may have difficulty
hearing the other person's voice, or transmitting to the
other person.
• Certain voices may sound unnatural, depending on the
person using the telephone, or on telephone line condi-
tions.
• Certain mobile phone features are dependent on the
capabilities and settings of your service provider's
network. Additionally, certain features may not be
activated by your service provider, and/or the provider's
network settings may limit the feature's functionality.
Always contact your service provider about feature
availability and functionality.
All features, functionality, and other product specifications,
as well as the information contained in the Owner's
Manual are based upon the latest available information
and are believed to be accurate at the time of printing.
Alpine reserves the right to change or modify any
information or specifications without notice or obligation.
6
-EN
[ The explanations in this Owner's Manual mainly
describe the following operations from the AV head
unit.

Answering a Call

Incoming calls are announced by the received call ring tone
and a displayed message (PHONE No.).
Touch [ ].
The call starts.
• Indicator (Signal Strength):
The indicator is displayed when the Bluetooth Audio
source or Tel. mode on the AV head unit is active..
CD Head Unit / Digital Media Receiver:
Press [PHONE].
• When "Setting the Received Calls automatically" (page 5)
is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.

Hanging up the Telephone

Touch [ ].
The call finishes.
CD Head Unit / Digital Media Receiver:
Press [PHONE].
Adjusting the volume when
receiving a Call
While calling, you can adjust the volume. The adjusted
volume level is stored.
Press [3] / [4] or turn the Rotary encoder to
adjust the volume.
CD Head Unit / Digital Media Receiver:
Turn the Rotary encoder or the Center jog dial to
adjust the volume.
• You may need to increase volume from your regular audio
listening source level. However, increasing the volume
excessively may result in feedback. If feedback is noticed as
feedback is directly related to the volume, turn down the
volume as low as acceptable to eliminate it. Positioning the
microphone in a direction away from the main car speakers
(e.g. clipped on sunvisor) may also reduce feedback at high
volume.