Whites MX 7 Manual Del Propietário página 13

peculiarities often cause the threshold to fade to silent. Changing the search
orientation can correct this anomaly. Searching in silence (no threshold) has
the advantage of better focus on the desired target responses. Unlike older
metal detectors, there is no difference in detection depth using either thresh-
old or silent search. However, those who search with a threshold tend to find
more artifacts as the threshold alerts the user to spots that have something
unusual about them—perhaps two targets near each other—and thus more
attention is paid checking for possible worthwhile targets.
Options- In Option mode/Menu (after pressing the Options button), the up and
down arrows are used to select the specific option to adjust. The + & - buttons
make adjustments to the selected option.
Summary:
Quickly press and depress the Option button and use up and down arrows to
view all the options; press + & - to adjust a specific option. Use the up and
down arrows to go to the next option, or press Options to search. Exit from
Options is automatic after 10–15 seconds. Simply press Option again if you
desire further adjustment.
Detection (Search mode) will continue while in the Options mode. Once options
have been adjusted, pressing Option button again will exit options.
Options will be slightly different depending on the search program. For exam-
ple All Metal, Prospecting, and Relic have the features that are specific to All
Metal-type programs. Features such as Self-Adjusting Threshold (SAT) and
Voltage Controlled Oscillation (VCO) only appear when one of the All Metal
modes are in use. These features have no influence over the Discrimination
programs and they will not appear as options.
13