Koblenz TP-2015 Manual De Operación Y De Servicio página 6

• WHEN THE FLOOR MACHINE IS NOT BEING USED FOR MORE THAN 10 MINUTES,
PUT IT IN HORIZONTAL POSITION. (See fig. 1)
• IF YOU LEAVE THE FLOOR MACHINE OVER THE BRUSH OR THE PAD DRIVER
WITH OR WITHOUT THE PAD, THEY COULD BE DEFORMED. THIS DEFORMATION
MAY CAUSE EXCESSIVE VIBRATION. (See fig. 2)
• TO INSTALL THE PAD DRIVER AND THE PAD OR BRUSH, PUT THE FLOOR
MACHINE IN HORIZONTAL POSITION.
• CHANGE THE PAD WHEN IT IS 1/4" THICK OR LESS. IF IT IS THINNER THAN
1/4", THE PAD DRIVER COULD BE DAMAGED.
6
ACCESORIES
ACCESSORIES NOT INCLUDED
Mount directly on floor machine
It should not be used directly to the floor.
Place the pad under this pad driver.
For our model TP-2S-2015-DC (two speeds) use only special
balanced pad driver for high speed machines.
Removes wax layers.
Improves the luster to create a more durable coat. Removes
scuff marks.
Mount directly on pad driver.
Removes imbedded dirt and grime.
Good for heavy duty cleaning.
Ideal for smooth surfaces.
Mount directly on pad driver.
Cleans carpets with shampoo foam without soaking.
Removes imbedded dirt and grime on any hard floor.
Mount directly on floor machine.
CARES WITH THE ACCESSORIES
PAD DRIVER
CLEANING AND POLISHING PAD (Tan fiber)
SCRUBBING PAD (Green fiber)
SHAMPOO BRUSH
SCRUBBING BRUSH