Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operating the Dishwasher
(ooot o o¢
End Signam
The dishwasher
emits a tone (five times)
to let
you know that your dishes are clean and dry. You
can change
the tone volume
or you can disable
it.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button four times to
display the current
End Signal setting
4. Press the ÷ or - buttons to obtain the
desired
volume.
End Signal 6 -loudest
setting
(factory
default
setting)
End Signal 0-
End Signal disabled
5. After selecting
the desired
volume,
you must
press the MENU/OK
button to save the
setting.
The display will show "Value Stored"
and return to the main menu. tf you did not
change
the volume,
press the START button
to return to the main menu.
6. Select the desired
wash cycle by pressing
the - or ÷ buttons.
7. Press START and close the dishwasher
door
to begin the cycle.
Rinse
Agent
Adjustment
This option allows you to adjust the amount
of
rinse agent the dishwasher
will dispense
to
control spotting
or streaking.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START button.
1. Open the dishwasher
door far enough to
expose the control panel.
2. Press the ON/OFF
button.
3. Press the MENU/OK
button five times to
display the current
rinse agent setting.
4. Press the + or - buttons to display the
desired
amount
of rinse agent.
5. tf your glassware
is spotted,
press + to
increase
the amount
of rinse agent
dispensed.
If your glassware
is streaked,
press - to decrease
the amount
of rinse
agent dispensed.
Rinse Agent 6 - maximum
amount
of
rinse agent available
Rinse Agent 4 - factory
default setting
Rinse Agent 0 - rinse agent dispenser
disabled
.
After selecting
the desired
amount
of rinse
agent to be dispensed,
you must press the
MENU/OK
button to save the setting. The
display will show "Value Stored" and return to
the main menu. If you did not change
the
rinse agent amount,
press the START button
to return to the main menu.
7. Select the desired
wash cycle by pressing
the - or ÷ buttons.
8. Press the START button and close the
dishwasher
door to begin the cycle.
Display
Language
Selection
This option allows you to select the display
language.
The first time that you use your
dishwasher
this screen
will automatically
appear.
NOTE:
In the Options
Step Down Menu you can
return to the main menu at any time by pressing
the START button.
.
2.
3.
4.
.
6.
.
8.
Open the dishwasher
door far enough to
expose the control panel.
Press the ON/OFF
button.
Press the MENU/OK
button six times to
display the current
language
setting
The available
language
choices
are:
AE = American
English
CF = Canadian
French
MS = Mexican
Spanish
Press the ÷ or - buttons
until the desired
language
flashes.
After changing
the language
selection,
you
must press the MENU/OK
button to save the
setting.
The display will show "Value Stored"
and return to the main menu. If you did not
change
the language,
press the START
button to return to the main menu.
Select the desired
wash cycle by pressing
the - or ÷ buttons.
Press START and close the dishwasher
door
to begin the cycle.
11
Publicidad
Tabla de contenido
