Adding Detergent and Rinse Agent (oont n.e¢
Rinse Agent
Always
use a liquid rinse agent, even if your
detergent
contains
a rinse agent or drying
additive,
to acNeve
proper drying
and proper
maintenance
of your dishware
and dishwasher.
The control
display will indicate
"Refill Rinse
Agent" when the cup needs filling. After rinse
agent is added,
"Refill Rinse Agent" will
disappear.
Filling
the Detergent
and Rinse
Agent
Dispenser
The detergent
and rinse agent dispenser
can be
filled from two positions:
the lowered
position,
with the dishwasher
door fully open or the raised
position,
from a more comfortable
posture
with
the dishwasher
door half-open.
FHHng the Detergent
Dispenser
(Lowered
Position)
1. Fill the detergent
cup as recommended
in
Table 1.
2. Slide the cover as shown in Figure 21, arrow
1 and press down firmly as shown
in Figure
21, arrow 2 so that the cover snaps shut.
Figure 21
Filling
the
Rinse
Agent
Dispenser
(Lowered
Position)
1.
Press the blue release
button as shown in
Figure 23 and lift the cover.
Figure 23
2. Add liquid rinse agent to the dispenser
as
shown
in Figure 24a until the rinse agent
reservoir
is full.
Figure 24
u
Opening
the Detergent
Dispenser
Cover
(Lowered
Position)
NOTE:
Pressing
down on the blue release tab
will not open the cover.
1. Press the blue release tab into the dispenser
as shown
in Figure 22.
Figure 22
2. The cover
will slide
open to
the left.
.
.
Return the rinse agent dispenser
cover to its
shut position
and press it firmly so that it
snaps
shut.
NOTE:
Figure
24b represents
a completely
empty nnse agent reservoir.
Refill the rinse agent dispenser
when the
rinse agent reservoir
level indicator
as
shown
in Figure 24b begins to show a silver
background
with black lines or when the
"Refill Rinse Agent" indicator
appears
on the
dishwasher
control
panel.
NOTE: After the rinse agent reservoir
is filled
and the dishwasher
door is shut, within a few
minutes the "Refill Rinse Agent" indicator
will
turn off.
14