Prepare Cutout/Cabinet Opening - Kenmore 204.23069610 Instrucciones De Instalación

3. Use two shortest screws to secure top of rear duct to the back of
microwave oven, as shown.
A B
A. Shortest screws (2)
B. Rear duct
C. back of microwave oven
4. Use four shortest screws to secure back of rear duct to the back
of microwave oven, as shown.
A
A. Shortest screws (4)
B. Rear duct
C. back of microwave oven
Stick Insulating Strip Over Vents
1. Stick the insulating strip over the vents in the side of the microwave to prevent
heat from exhausting through the vents. Heat will be exhausted through the bottom
duct once the microwave is mounted in the cabinet.
A B
A. The insulating strip
B. Side Vents
C
B C

Prepare Cutout/Cabinet Opening

1.
On the cutout floor, find and mark the centerline.
2.
Place the bottom duct in the opening, with the flange resting
against the bottom front facing of the opening.
A. Cutout floor
B. Centerline
C. Bottom duct
3. Align the center arrows on the bottom duct with the centerline
drawn in Step 1 above.
4. Mark the three mounting holes through the bottom duct onto
the cutout floor.
A
EN-4
A B
D E
D. Bottom duct flange
E. Front facing
A
A. Bottom duct
B. Center arrows, aligned with centerline
B
A. Short screws (3)
B. Bottom duct mounting holes
C
B