Assembly - Attaching The Blades; Attaching The Blades To The Blade Brackets - Home Decorators Collection CARLISLE 51760 Manual Del Usuario

Assembly - Hanging the Fan (continued)
7
Mounting the fan-motor assembly
(standard mount)
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Align the locking slots of the ceiling canopy (C) with the two
screws (DD) in the mounting bracket (A). Push up to engage the
slots and turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (DD).
□
Install the two mounting screws (saved from Assembly Step 1
"Preparing for mounting") into the holes in the canopy (C) and
tighten firmly.
□
Install the decorative canopy ring (FF) by aligning the ring's slots
with the screws in the canopy (C). Rotate the ring clockwise
to lock in place.

Assembly - Attaching the Blades

1
Attaching the blades to the blade
brackets
□
Attach a blade (G) to blade bracket (H) by inserting the screws
(AA) into the holes in the blade and through the blade bracket
(H).
□
Tighten each screw securely.
□
Repeat this step for each blade and blade bracket.
G
AA
H
11
A
2
Fastening the blade assemblies to
the motor
□
Fasten the blade/blade bracket assembly (H) to the fan motor
assembly (E) by inserting the alignment post into the slot on
the bottom of the motor and tightening the pre-installed blade
bracket screws (OO).
□
Repeat this step for the remaining blade assemblies.
OO
Please contact 1-800-986-3460 for further assistance.
DD
FF
E
E
H
HOMEDEPOT.COM/HOMEDECORATORS