Pumped Liquids; Technical Data; Maximum Operating Pressure - Saci XV-F Serie Instrucciones De Instalación Y Funcionamiento

XV/XVI/XV-F SS Vertical Multi-stages Centrifugal Pumps
1. Model numbering and nameplate format
1.1 Model numbering
Example:
1.2 Nameplate format
!
12. Pump Type – Seal Type
13. Pump Model
14. Frequency
15. Rated Power
16. Speed
17. Maximum Head
18. Capacity
19. Head Range

20. Maximum Operating Pressure

21. Rotating Direction
22. Serial Number
!
2. Handling
Read these instructions carefully before beginning installation. Lift and handle these pumps carefully. XV, XVI &
XV-F series are vertical multi-stage non-self priming pumps coupled with standard electric motors. This manual
applies to standard version pumps and for standard applications. Contact your supplier or the factory for information
about special pump versions and applications.
!
3. Applications
XV, XVI & XV-F series in-line pumps booster pumps are designed for a wide range of applications in various
industries – for water treatment, water boosting, water supply, cooling, cleaning, etc.

3.1 Pumped liquids

The pumps are designed for use with clean, viscous and non-explosive liquids that do not contain abrasive matter.
WARNING
These pumps are not designed to be used with abrasive, solid containing, explosive and corrosive liquids.
For special application, please contact your supplier or the factory.

4. Technical data

4.1 Temperatures
Ambient temperature: 0° C to +40° C
WARNING
If ambient temperatures are above +40 degrees C, or if the pump is located at elevations more than 1,000 meters above sea level,
the motor's output must be decreased to compensate for less effective cooling, and may have to be replaced with a stronger motor.
Liquid temperature: -15° C to +120° C
4.2 Maximum operating pressure
XV/XVI/XV-SS 5
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
16 SQQE
14
Code for shaft seal
Number of stages
Nominal flow m3/h
Type Ranges
!