Install Light Bulbs And Warming Lamps; Install Filters - Broan Elite RM60000 Serie Manual Del Usaurio

13. INSTALL LIGHT BULBS AND WARMING LAMPS

Install (2) heat lamp bulbs. Use BR40 size, 250 W max., infrared bulbs only (sold separately).
Install (3) halogen light bulbs. Use PAR20 size, 50 W (sold separately).

14. INSTALL FILTERS

Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert upper end of filter into the hood (finger sized cup side).
2. Raise lower end toward the inside of hood.
3. Position lower end of filter into channel and pull.
4. Using finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.
1
2
3
HD0024
Replacement filters are available from your dealer. See label inside hood for size and part number.
Baffle Filters
Baffle filters are available as an option. To order them, refer to the table below to find the appropriate filter kit number
to your hood. To install them, refer to instruction sheet included with baffle filter kit.
K #
IT
RBF6030
RBF6036
RBF6042
RBF6048
RBF6054
RBF6060
RBF6066
RBF6072
CAUTION
4
H
OOD WIDTH
30"
36"
42"
48"
54"
60"
66"
72"
HD0065
HD0011
B (
AFFLE FILTER TYPICAL
- 10 -
)