Warranty Information - BriskHeat JHS-GET Manual De Instrucciones

Idiomas disponibles

22. Remove screws from terminal block inside

main box.

23. Install the wires onto terminal blocks.

24. Inspect, and if necessary, adjust/move the

braided wire away from the bus wires to

prevent incidental contact with the bus

wires.

25. Tighten screws back into position onto the

terminal block.

26. Trim and remove any loose or extra wire.

Trim

27. Install Gaskets and Covers onto the main

box and secure covers with screws.

JHS-GET

Low-Profile Inline Splice Connection Kit

28. Attach the Low Profile Inline Splice

Connection and heating cable to the pipe

with fiberglass tape (PSAT36A).

29. Install insulation.

30. Install label on the outside of the

insulation.

31. Give instruction to the owner/user.

WARRANTY INFORMATION

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18) months

from date of shipment or twelve (12) months from date of installation, whichever comes

first. BriskHeat's obligation and the exclusive remedy under this warranty shall be limited to the

repair or replacement, at BriskHeat's option, of any parts of the product which may prove

defective under prescribed use and service following BriskHeat's examination, is determined by

BriskHeat to be defective. The complete details of the warranty can be found online at

www.briskheat.com or by contacting us at 1-800-848-7673 (toll free, U.S. / Canada) or

1-614-294-3376 (Worldwide).

4800 Hilton Corporate Dr Columbus, OH 43232

Toll Free: 800-848-7673

Phone: 614-294-3376

Fax: 614-294-3807

Email: bhtsales1@briskheat.com

JHS-GET

Low-Profile Inline Splice Connection Kit

Tabla de Contenido