Current Sensor; Connections To Instrument - Vetus CCM Manual De Manejo Y Instrucciones De Instalación

3.4 Current sensor

Fit the current sensor to the plus (+) cable to the anchor windlass motor. Use tape or ty-
raps ® for this. Fit the current sensor as shown. Make sure that it is fitted in the correct direc-
tion.
Position the current sensor at least 1 metre from a magnetic field.
Do not position the current sensor in the vicinity of other electric wires carrying a high cur-
rent.

3.5 Connections to instrument

10-pole connector
No. Signal
1 + battery
2 – battery
3 – battery
4
5 current sensor
6 command 'UP'
7 command 'DOWN'
8
9
10 chain sensor
Control panel / chain counter CCM
8
7
9
6
10
1
5
2
4
3
060123.01
ENGLISH
19