Store the tool in a dry, clean area out of reach of children.
During extended periods of storage, ensure that the tool is
protected against corrosion and rust.
Problem
Unit does not run
Slow running, noisy or hot blades
—
Bar and chain running hot and
smoking
—
Motor runs but chain is not rotating
Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact us
at 1-800-313-5111. Be sure to provide all pertinent facts when you call or visit.
REPAIR PARTS
Please record your serial number in the space provided below.
• NAME OF ITEM
• MODEL NUMBER
• SERIAL NUMBER
STORAGE
TROUBLE SHOOTING
Possible Cause
Extension cord not connected to
the plug
Cord not connected to power
source
Trigger switch not fully operated
Chain brake is engaged
Dry, corroded blades
Blades or blade support bent
Bent or damaged teeth
Loose blade bolts
Check chain tension for
over-tight condition
Chain oil tank empty
Chain installed in wrong
direction
Chain tension too tight
Check guide bar and chain for
damage
SERVICE
ELECTRIC CONVERTIBLE 4 IN 1 COMBO
CVP41810
CALL US FIRST !!
Call us first with questions about operating or maintaining your product
at 1.800.313.5111 between 7:30 a.m. – 4:30 p.m. Eastern Standard Time,
or send emails to earthwise@reelin.com.
At the end of the season, or if the tool is not being used for
longer than a month, wipe over all metal surfaces with an oil
impregnated cloth to protect them from corrosion or spray with
a fine coat of oil.
Check extension cord is fully connected to tool
Check extension cord is fully connected to a live receptacle
Check that safety lock of button is fully depressed prior to
moving trigger
Pull hand guard back toward front handle
Lubricate blades
Straighten blade or blade support
Straighten teeth
Tighten blade bolts
Adjust chain tension
Fill tank with chain oil
Reverse chain so that cutters face the right direction
Adjust chain tension
Replace damaged bar and chain with identical replacement
parts.
13
Possible Solution