NSK S-Max pico Manual De Operación página 11

5-4 Lubrication
PANA SPRAY Plus /PANA SPRAY
S-Max pico QD
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle into the Spray Port nozzle on the can.
3) Insert the Spray Nozzle in rear of the handpiece. Hold the handpiece and spray for approximately 2-3
seconds. Apply lubricant until it expels from the handpiece head for at least 2 seconds. (Fig.8)
S-Max pico M4/S-Max pico B2
1) Remove the handpiece from the hose.
2) Mount the arrow-head spray nozzle tip into the spray can port. (Fig.9)
3) Insert the Spray Nozzle into the Drive Air Port of the handpiece. (Fig.10) Hold the handpiece and spray
for approximately 2-3 seconds. Apply lubricant until it expels from the handpiece head for at least 2
seconds.
10
Spray Nozzle
PANA SPRAY Plus/PANA SPRAY
Fig. 8
Arrow-head spray nozzle tip
PANA SPRAY Plus/PANA SPRAY
Fig. 9