NSK S-Max pico Manual De Operación página 8

· Do not use any bur longer that the NSK recommended Specification.
· Do not use bent, worn, damaged, or non-concentric burs. Such burs can cause damage to the handpiece.
· Do not exceed the bur speed recommended by the bur manufacturer.
· Always keep the bur shank clean. Entry of hard debris into the chuck via the bur shank could cause rotation slip and also prevent the bur from
being securely located in the chuck.
4-1 To insert the Bur
1) Insert the bur until it stops. (
2) Depress the Push Button. (
3) Insert the bur into the chuck until it is stops. (
4) Release the button.
4-2 To remove the Bur
)
Depress the Push Button and remove the bur.
) ( )
)
Fig. 4
7