Snapper 2691525-00 Manual Del Operario página 19

30
Front Wheel Bearing
Lubricate the front wheel grease fittings (A, Figure 31) with
five shots of general purpose grease, from a grease gun.
31
Shift Lever
Lubricate the shift lever grease fitting (A, Figure 32) with two
shots of general purpose grease from a grease gun.
32
Rear Axle Bearing
1. The grease fitting (A, Figure 33) on the left rear axle
bearing requires three shots of general purpose grease
from grease gun.
2. The right rear axle bearing is lubricated by the differential
lubricant and requires no grease.
33
Lubrication – Mower Deck Linkage
Lubricate all mower deck linkage pivot points with a light coat
of motor oil.
Lubrication – Differential / Chain Case
1. Stand the rear engine rider on its rear bumper and check
the fill/level plug (A, Figure 34) on the differential (B) for
cracks and wear. Replace the fill/level plug if signs of
wear are visible.
2. To check lubricant, remove the fill/level plug and
visually inspect for lubricant on the internal parts of the
differential. If no lubricant is visible on the internal parts of
the differential, add transmission grease as needed.
Important: Overfilling the differential with lubricant will cause
lubricant to leak onto drive components.
19