Pari SINUS 028 Manual Del Usuario página 72

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 85
Disinfecting
CAUTION
Risk of infection due to growth of bacteria
A damp environment may encourage the growth of bacteria.
• Remove all parts from the pot or disinfector as soon as
disinfection has finished.
• Dry all the parts.
After cleaning, disinfect the dismantled nebuliser and accessor-
ies used (except the PARI SINUS tube system). Effective disin-
fection is only possible if the nebuliser has been cleaned.
In boiling water
• Place all the individual parts in boiling water for at least
5 minutes. Use a clean pot and fresh water with reduced
calcium content, if possible.
NOTICE! Risk of damaging plastic parts! Plastic will melt if
it comes into contact with the hot base of the pot. Make sure
the water level in the pot is high enough to enable the parts
to float clear of the base.
• You can remove excess water more quickly by shaking all
parts.
– 72 –

Publicidad

Tabla de contenido
loading

Tabla de contenido