Jungheinrich ETR 314 Manual De Instrucciones página 42

1.2.3 Warning messages on the operator display
Display
INFO 02
INFO 03
INFO 04
INFO 07
INFO 08
INFO 10
INFO 11
INFO 12
INFO 22
INFO 24
INFO 25
INFO 26
INFO 27
INFO 30
INFO 31
INFO 32
INFO 33
INFO 34
INFO 35
INFO 36
INFO 48
Further action
"Dead man switch" symbol
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"End of lift reached" symbol /
buzzer
"Dead man switch" symbol
Flashing "service mode"
symbol / buzzer
Flashing "parking brake"
symbol / buzzer
"Creep speed" symbol
"Overtemperature" symbol /
buzzer
"Overtemperature" symbol /
buzzer
"Overtemperature" symbol /
buzzer
"End of lift reached" symbol
Flashing "End of lift reached"
symbol
"Warning" symbol / buzzer
"Stop" symbol / buzzer
Flashing "Overtemperature"
symbol / buzzer
Flashing "Overtemperature"
symbol / buzzer
Flashing "Overtemperature"
symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol / buzzer
"Warning" symbol / buzzer
Meaning
Seat switch not closed
No travel direction preselected
Not released for travel
No setpoint
Battery empty, main lift turned off
Safety switch not pressed
Incorrect start At least 1 control
element not in idle state for system
start
Parking brake not engaged
Creep speed active, i.e., lock-
enforced
Drive motor overtemperature
Lift motor overtemperature
Steering motor overtemperature
End of lift has been reached
Safety height has been exceeded
Drive control does not recognize
electrical steering
Turn voltage on vehicle off / on
Drive control overtemperature
Lift control overtemperature
Steering control overtemperature
Two travel directions are selected
Drive pedal is not in idle state
No shift path reference
Overvoltage
Overvoltage
Undervoltage
Undervoltage
Horizontal impact of Level 1 in ISM
E 11