SOMFY 121357A Manual De Instalación página 16

Hook hole:
• Close the Indoor Siren unit by replacing
the rear panel.
• Drill just one hole in the wall at the desired location.
• Insert one of the plugs, then screw in a screw leaving
a section extending out from the wall (to be used as
a hook).
• And hook the Siren onto the screw, like
a picture.
If necessary:
It is possible to secure the Siren to prevent it
turning: an adjustment slot is provided at the base
of the back (b).
• Drill the wall at the corresponding location.
• And insert the remaining plug and screw.
• When attaching the Indoor Siren using the hook hole (a),
it is also secured via the slot (b).
The Indoor Siren is now operational.
It can be used to protect your home, or for SMART
programmes.
Refer to the instructions on the TaHoma
user guide for further explanations.
16
Copyright © 2017 Somfy SAS. All rights reserved.
(a)
(b)
interface or to its full
®